BACHFIRE CONFLEX EI 120 is an Automatic Fire Curtain that in case of fire, limits and controls the fire on conveyor belts, minimizing not only radiation emission but also heat transfer, creating isolation from the fabric so that protection of people and goods is maximized, with classification EI 120.

The curtain is composed of fiberglass fabric coated on both sides and seamed with reinforced steel wire and fixed to a steel roller of 78 mm in diameter. Galvanized steel elements such as headbox, side guides and bottom bar (adaptable depending on the belt type). Irrigation system through a sprinklers system.

All the system is driven by a 24 V tubular motor and controlled by an electronic board, CRM (Control and Regulation for Motor) with Special Gravity Failsafe System. The control panel for automatic curtains (CBM), with a nominal input voltage of 220 V and output voltage of 24 V. Uninterruptible Power Supply (UPS System) with autonomy up to 6 hours.

Tested and approved according to the European Standards UNE EN 1366-7:2006.

The system can be activated by a SHEV, fire alarm contact, internal fire and smoke detection devices, or manual emergency buttons. In the event of a fire, the BACH’s Control Panel (CBM), receives the signal alarm, and the automatic curtain deploys automatically, with the controlled and safe constant speed of descent even following total power loss on all curtains. A solenoid valve connected to BACH´s control panel can activate the irrigation system. If there is a false alarm the curtains return to the standby position automatically after resetting the alarm from the main Fire Management Systems. In case of main power loss, the curtain will remain fully retracted for up to 6 hours thanks to BACH’s battery backup system.

– Hidden fire partitioning and sectorization system;
– Perfect combination between architecture and security against fire;
– Integrated system with the central fire detection system;
– Easy installation and maintenance;
– Gravity failsafe system;
– Low consumption;
– Battery backup power supply;
– Obstacle control system (optional).

BACHFIRE TEX 1000/02: fibreglass fabric resists up to 1,100ºC.
Grey colour.

Galvanized Steel head box 1.2 mm thickness

Galvanized Steel of 1.5 mm thickness
Dimensions: 80 x 50 mm

Galvanized steel roller:
Thickness 1.2 mm;
Diameter 78 mm.

Adaptable to conveyor belt

BACH tubular motor 24V.
Maximum power 24 W.
Maximum current 3 A.
Angular speed 21 rpm.

Polyester box with an electronic board inside to control the movement of the motor.
Dimensions: 140 x 180 x 75 mm.

Receives the alarm signal from the Central Fire Detection System and controls the movement of curtains.
Dimensions: 400 x 300 x 210 mm.
Input: 220 V 50Hz.
Output: 24 V.
Battery: 2 x 12 V 7.5 Ah rechargeable (up to 6 hours autonomy).
Visual and acoustic alert system.
Maximum capacity up to 12 motors.

A solenoid valve connected to BACH´s control panel can activate the irrigation system with a delay of 3 minutes. The number of sprinklers depends on the area of each system. The fluid conditions are the following:
Pressure ≥ 2.5 bar;
Q = Nominal water flow accordingly to the system dimensions.

Between 0.06 and 0.15 m/s

Obstacle control system